Logo of LusoCoder

Why do amplifiers sound “warm”?

Why do amplifiers sound “warm”?

In most cases, when someone describes an amplifier (or source unit or processor) as sounding “warm,” that is a result of the presence of audible intermodulation distortion. Of course, you will want to choose an amplifier that offers the lowest possible distortion numbers for your given budget. [6]

Secondly, What is the warmest sounding AMP? Regarding SS amps, ones that use MOSFETs are often cited as having a warmer sound. My limited experience with these supports that I think. Tandberg gear was known for MOSFET use I believe and the Tandberg sound was always a tad towards being warm sounding. Tandberg tr2080 was the warmest sounding amp I have owned personally. [0]

Then, What makes a tube amp sound like a tube? What is commonly associated with the 'tube sound' is the 2nd harmonic, which does not have to exist in a tube amp as the harmonic distortion signature is highly dependent on the topology of the amplifier circuit. This is true whether tube or solid state. [0]

Accordingly, Do solid state amps with MosFET outputs sound warmer? I have found that, in general but not always, solid state amps with MOSFET outputs sound somewhat warmer althought slightly less transparent than bipolar output transistors. One relatively inexpensive power amp with bipolar output transistors that I think leans just a bit to the warmer side is the Cambridge 851w stereo power amp. [0]

Herein, Do you prefer tube amps or SS amps? Some SS amps are more neutral or less bright than others. Same true with tube amps. I don't think either wins categorically anymore these days in general though perhaps that used to be true to a greater extent. The technology on the other side of the fence from tubes is anything but stagnant. [0]

What makes a tube amp sound like a tube?

What makes a tube amp sound like a tube?

Additionally, When were tubes used in amplifiers? The use of tubes in amplifiers, whether incorporated into a radio, or as a separate part of a sound system, has its origins in the first half of last century. The first tube was invented in 1904, by an English engineer named John Ambrose, who at the time worked for the Marconi Company. [6]

Correspondingly, What is the difference between tube amps and solid state amps? This means that you get an incredibly melodious sound when you crank tube amps up. Solid-state amps, on the other hand, will produce no harmonious distortion whether they’re cranked up or not. Another thing that sets tube amps apart is that they’ll give you a fantastic sound at every level. [1]

One may also ask, Why are tube amps such a big deal? Here are the main reasons tube amps have always been such a big deal. Tube amps are far more responsive than their solid-state and digital counterparts. Tube amps sound creamy and warm, while solid-state amps tend to sound brittle and sterile, especially when cranked up to overdrive. [1]

Thereof, How to make a tube amp sound like a tube amplifier? One way to get one step closer to the sound of a tube amp is a tube distortion pedal. These pedals emulate the sound of a tube being overdriven. This, in turn, gives you that warm and dynamic tone you would get from cranking a tube amplifier. [3]

Do solid state amps with MosFET outputs sound warmer?

Do solid state amps with MosFET outputs sound warmer?

Correspondingly, Which simaudio amplifier is the best? The NAD is the great sounding Amplifier. Just replace stock jumpers with the Cardas jumpers. It will sound a way better then any Simaudio Int.Amplifier from NEO Series. for. It sounds better then then Bryston B60. [0]

Also, What is the warmest sounding Tandberg AMP? Tandberg gear was known for MOSFET use I believe and the Tandberg sound was always a tad towards being warm sounding. Tandberg tr2080 was the warmest sounding amp I have owned personally. It was very sweet sounding as older SS gear goes. [0]

Also, What is the best power amp for sound warm? Stick with nad. I have found that, in general but not always, solid state amps with MOSFET outputs sound somewhat warmer althought slightly less transparent than bipolar output transistors. One relatively inexpensive power amp with bipolar output transistors that I think leans just a bit to the warmer side is the Cambridge 851w stereo power amp. [0]

Then, Do MOSFET amps sound warmer? Regarding SS amps, ones that use MOSFETs are often cited as having a warmer sound. My limited experience with these supports that I think. Tandberg gear was known for MOSFET use I believe and the Tandberg sound was always a tad towards being warm sounding. [0]

Do you prefer tube amps or SS amps?

Do you prefer tube amps or SS amps?

Also, Do solid state amps sound good? The way that solid state amps sound will depend mostly on circuit design, and since the sound is based on transistor switches, there’s generally less room for responsiveness to the way you play and many guitarists reckon that solid-state amps produce a bland sound. [5]

Similarly, people ask, What is a tube amp and how does it work? In a tube amp, vacuum tubes are used in both the preamp and power amp sections to boost your signal. When more signal is sent to the amp via the gain or volume knobs, the tubes will be pushed harder and more electrons will flow through the tubes, resulting in harmonic distortion. Tube amps also require a transformer to help drive the speaker. [6]

Also, How do solid state amps work? In a solid state amp, these tubes are replaced with transistors that do not react in the same way to more signal being fed through them. In modeling amps, digital processors are used to emulate the function and response of tubes. RECOMMENDED VIDEOS FOR YOU... [6]

Accordingly, What is the difference between tube and solid state amps? While Tube amps operate using vacuum tubes (also known as valves), solid state amps utilize transistors. Both tube and solid state amps will sufficiently amplify your electric guitar but will theoretically differ in how they respond to your guitar signal, thus resulting in differing output and tone characteristics. [5]

References

  • Share: